Utveckling av insatsmodul till en Arcam S12 EBM-maskin: För möjliggörande av småskaliga tester med mindre pulveråtgång
2019 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE credits
Student thesis
Abstract [sv]
Arbetet behandlar utvecklingsprocessen för en insats till en ARCAM S12 Electron Beam Melting-maskin.
Behovet består i att dagens maskin kräver en full tank med tillverk-ningsmaterial för att kunna användas. Den överdrivna materialtillför-seln leder till att maskinen ej kan ses som lämplig för materialforskning, då nya material måste tillverkas i stora satser varav en stor del går som svinn. Målet med arbetet blev därför att utveckla en insats till maskinen, som skulle göra den gångbar att använda vid materialforskning, utan att permanent påverka ursprungsfunktionen.
Den utvecklade insatsen har som funktion att sänka materialanvänd-ningen i maskinen, och därigenom göra maskinen applicerbar för materialforskning. Detta genom att minska byggytan och skapa en mer sofistikerad materialmatning än originalutförandets. Materialmatningen är också modulär, på så sätt att mängden materialpulver som matas ut per cykel kan varieras med olika insatser.
Under arbetets gång behandlas alla processens steg, från målspecifikat-ionen till det slutgiltiga konstruktionsunderlaget. Projektet startade med en funktionsanalys och uppställande av en målspecifikation. Därefter startade konceptgenereringsprocessen med både kreativa och mer stringenta utvecklingsmetoder. Efter detta genomfördes konceptval med flera strukturerade konceptvalsmetoder. Det valda konceptet modellerades sedan i sin slutgiltiga form i SolidWorks. Via SolidWorks interna ritningssystem ritades även konstruktionsunderlag till insatts-modulen.
Projektets resultat är ett färdigt konstruktionsunderlag för en modul som passar i en ARCAM S12 EBM-maskin. Denna modul minskar byggvolymen till 110x110xbygghöjden i millimeter, och likriktar mängden material applicerat mellan lagerna.
Abstract [en]
This thesis work is focused on the product development of an insert module for an ARCAM S12 Electron Beam Melting machine
The need for an insert module comes from the fact that the machine requires a full tank of building material to operate as intended. With concern to the large building volume the original machine cannot be seen as a viable alternative for materials research, because such research often uses expensive experimental materials. The goal for the module is therefore to lower the use of building material, and trough that make the machine viable for materials research without permanently affecting the original function. Another important function of the new module is the possibility to control and synchronize the amount of material dispensed between layers of the build.
During the length of the thesis, the entire development process of the module is discussed. From the target specification, to the finished blueprints.
The process started with the establishment of a target specification, followed by a phase of concept development containing both creative and stringent methods. After these concepts had been evaluated and culled through structured methods a final concept was selected. This concept was then modeled in Solid Works and technical drawings of the model was made for the blueprint.
The result of the thesis work is a finished blueprint for an insert module that fits an ARCAM S12 EBM machine. This module has lowered the build volume to 110x110xthe build height in millimeters, and has the possibility to synchronize the amount of material dispensed between layers.
Place, publisher, year, edition, pages
2019. , p. 105
Keywords [en]
Modular, Powder Feeding, Build Volume, Additive Manufacturing, EBM
Keywords [sv]
Modulär, Pulvermatning, Byggvolym, Additiv Tillverkning, EBM
National Category
Other Mechanical Engineering
Identifiers
URN: urn:nbn:se:miun:diva-38227DOI: MT-V19-G3-014OAI: oai:DiVA.org:miun-38227DiVA, id: diva2:1385645
Subject / course
Mechanical Engineering MT1
Educational program
Sportteknologi - maskiningenjör inom innovativ produktutveckling TSPMG 180 GR
Supervisors
Examiners
Note
Betyg 190909
2020-01-152020-01-152025-09-25Bibliographically approved