Mittuniversitetet

Time-varying electric fields induce displacement currents through capacitive coupling, resulting in current continuity even in the absence of conduction paths. While capacitive coupling is known as a parasitic effect, its role in directly activating solid-state devices in open circuits remains underexplored. Here, we demonstrate that externally generated, time-varying electric fields—produced by triboelectric excitation or moving charged objects—can directly activate linear and nonlinear components, such as diodes, rectifiers, and LEDs, without a galvanic connection. A lumped-element capacitive-coupling model captures the observed dependencies Vab∝ω and Vab∝1/r, validated experimentally on both linear and non-linear components. The resulting field-driven activation enables energy harvesting in open circuits, multi-channel control, and wireless sensing of human motion and mechanical vibrations over meter-scale distances. This quasi-static capacitive coupling operates in a distinct regime compared to resonant wireless power transfer, because it is drive by low-frequency, motion induced electric field changes that generate transient displacement currents in floating circuits. The findings here enable contact-free activation of electronic components through discrete energy transfer rather than traditional continuous power delivery.

Single‐frequency lasers are essential for high‐resolution spectroscopy and sensing applications as they combine high‐frequency stability with low noise and high output power stability. For many of these applications, there is increasing interest in power‐scaling single‐frequency sources, both in the near‐infrared and visible spectral range. We report the second‐harmonic generation of 670 μJ at 532 nm of a single‐frequency fiber amplifier signal operating in the quasi‐continuous‐wave mode in a 10‐mm periodically poled Mg‐doped lithium niobate (MgO:PPLN) crystal, while increasing compactness. To the best of our knowledge, this is the highest pulse energy generated in this crystal, which may find applications in the visible and UV such as remote Raman spectroscopy. 

We report on a single-frequency fiber master oscillator power amplifier utilizing a polarization-maintaining step-index fiber with an Al/Ce/F core-glass composition doped with a very high Yb concentration (0.25 at.%). This design made it possible to use a very short fiber (~1 m) and to coil it in a tight radius (4 cm in the amplifier, while 2 cm gave similarly negligible bending loss) so that the packaged system is one of the most compact reported to date (~0.6 L). The use of a short fiber increased the threshold for stimulated Brillouin scattering well above 100 W while maintaining near-ideal beam quality. The fiber was pumped with a diode-pumped solid-state laser and cooled passively by spooling it on a grooved aluminum mandrel. The amplifier produced a strongly linearly polarized output at 1064 nm in the fundamental mode (M2 ≤ 1.2) with a 150 kHz linewidth and a power of 81.5 W for 107 W of launched pump power. No deleterious effects from the elevated thermal load were observed. The residual photodarkening loss resulting from the high Yb concentration, found to be small (~0.7 dB/m inferred at 1064 nm) with accelerated aging, reduced the output power by only ~20% after 150 h of operation. 

The unique electronic properties of semiconductor nanowires, in particular silicon nanowires (SiNWs), are attractive for the label-free, real-time, and sensitive detection of various gases. Therefore, over the past two decades, extensive efforts have been made to study the gas sensing function of NWs. This review article presents the recent developments related to the applications of SiNWs for gas sensing. The content begins with the two basic synthesis approaches (top-down and bottom-up) whereby the advantages and disadvantages of each approach have been discussed. Afterwards, the basic sensing mechanism of SiNWs for both resistor and field effect transistor designs have been briefly described whereby the sensitivity and selectivity to gases after different functionalization methods have been further presented. In the final words, the challenges and future opportunities of SiNWs for gas sensing have been discussed.

High-power, single-frequency, pulsed fiber amplifiers are required in light detection and ranging, coherent laser detection, and remote sensing applications to reach long range within a short acquisition time. However, the power-scaling of these amplifiers is limited by nonlinearities generated in the optical fibers, in particular by stimulated Brillouin scattering (SBS). In this regard, the use of multicomponent phosphate glasses maximizes the energy extraction and minimizes nonlinearities. Here, we present the development of a single-stage, hybrid, pulsed fiber amplifier using a custom-made multicomponent Yb-doped phosphate fiber. The performance of the phosphate fiber was compared to a commercial Yb-doped silica fiber. While the latter showed SBS limitation at nearly 6.5 kW for 40 cm length, the maximum achieved output peak power for the multicomponent Yb-doped phosphate fiber was 11.7 kW for 9 ns pulses using only 20 cm with no sign of SBS.

There is an increasing demand for compact, reliable and versatile sensor concepts for pH-level monitoring within several industrial, chemical as well as bio-medical applications. Many pHsensors concepts have been proposed, however, there is still a need for improved sensor solutionswith respect to reliability, durability and miniaturization but also for multiparameter sensing. Here wepresent a conceptual verification, which includes theoretical simulations as well as experimentalevaluation of a fiber optic pH-sensor based on a bio-compatible pH sensitive material not previouslyused in this context. The fiber optic sensor is based on a Mach-Zehnder interferometric technique,where the pH sensitive material is coated on a short, typically 20-25 mm thin core fiber splicedbetween two standard single mode fibers. The working principle of the sensor is simulated by usingCOMSOL Multiphysics. The simulations are used as a guideline for the construction of the sensorsthat have been experimentally evaluated in different liquids with pH ranging from 1.95 to 11.89. The results are promising, showing the potential for the development of bio-compatible fiber optic pH sensor with short response time, high sensitivity and broad measurement range. The developedsensor concept can find future use in many medical- or bio-chemical applications as well as inenvironmental monitoring of large areas. Challenges encountered during the sensor developmentdue to variation in the design parameters are discussed.

Interest in compact, single-frequency fiber amplifier has increased within many scientific and industrial applications. The main challenge is the onset of nonlinear effects, which limit their power scaling. Here we demonstrate a compact, high-power, single-frequency, polarization-maintaining, continous-wave fiber amplifier using only one amplification stage. We developed the fiber amplifier using a master oscillator fiber amplifier architecture, where a low-noise, single-frequency, solid-state laser operating at 1064 nm was used as a seed source. We evaluated the amplifier's performance by using several state-of-the-art, small-core, Ytterbium (yb)-doped fibers, as well as an in-house-made, highly Yb-doped fiber. An output power of 82 W was achieved with no sign of stimulated Brillouin scattering. A good beam quality and a polarization extinction ratio (PER) of > 25 dB were achieved. The compact fiber amplifier can be a competitive alternative to multi stage designed fiber amplifiers.

Environmental monitoring of land, water and air, is an area receiving greater attention because of human health and safety concerns. Monitoring the type of pollution and concentration levels is vital, so that appropriate contingency plans can be determined. To effectively monitor the environment, there is a need for new sensors and sensor systems that suits these type of measurements. However, the diversity of sensors suitable for low, battery powered- and large area sensor systems are limited. We have manufactured and characterized a flexible pH sensor using laser processing and blade coating techniques that is able to measure pH between 2.94 and 11.80. The sensor consists of an interdigital capacitance with a pH sensitive hydrogel coating. Thin sensors can reach 95% of their final value value within 3 min, and are stable after 4 min. Good repeatability was achieved in regard to cycling of the sensor with different pH and multiple measurements from dry state. We have also studied the relation between an interdigital capacitance penetration depth and hydrogels expansion. We believe that our passive sensor is suitable to be used in low power and large area sensor networks.