Vidareutveckling av splitboardclips: En förbättring av design och vridstyvhet
2015 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE credits
Student thesis
Abstract [sv]
Denna rapport behandlar en vidareutveckling av splitboardclips på uppdrag av företaget Furberg Snowboards. Målet har varit att skapa ett nytt koncept som är mer vridstyvt än föregående konstruktion, utan att försvåra användningen. Genom förstudier så har en mängd kriterier definierats. Dessa grundar sig bland annat på olika belastningsfall, användningsmiljö och handhavande. Med hjälp av skisser och 3D-modelleringsprogrammet Solidworks har därefter en mängd olika lösningsförslag genererats. Dessa har genom visuell besiktning gallrats och utvecklats med produktutvecklingsverktyget Pughsmatris tills endast två koncept återstod. Dessa två har därpå belastats med simule-rade krafter i programvaran Solidworks Simulations för att utröna hur väl de presterar både gentemot varandra, men även gentemot de split-boardclips av märket Voilé som företaget säljer ihop med sina split-boards idag. Resultatet är ett nytt unikt koncept som består av endast en rörlig del som går att tillverka genom bockning. Konstruktionen är i sin enkelhet ett vinkeljärn av aluminiumlegeringen 7075-T6 som roterar kring en fästpunkt, i vilken den är fastskruvad i ena brädhalvan. Samti-digt har vinkeljärnet två utskurna spår, som används för att fästa i bultar på den andra brädhalvan. Den nya lösningen kan även justera avståndet mellan de båda brädhalvorna genom en nykonstruerad justerbar bricka, vilket är till stor fördel då fabriken som tillverkar företagets splitboards inte kan borra monteringshålen med större precision än +/- 0,5 mm. Den nya konstruktionen har genom simulering dessutom visat sig vara mycket mer vridstyv är Voilés clips.
Abstract [en]
This report is a further development of split-board clips on assignment for the company Furberg Snowboards. The goal has been to create a new concept which is more rigid than the previous design, without compromising on the user interface. Through feasibility studies a number of criteria has been defined. These are based, among other things, on different load cases, the use environment and operation. With the help of sketches and the 3D modeling program Solidworks a variety of proposed solutions has been generated. These have by visual inspec-tion been culled and developed with the product tool the Pugh’s matrix until only two concepts remained. These two have then been charged with simulated forces in the software Solidworks Simulation to deter-mine how well they perform both against each other, but also to the split-board clip of the brand Voilé which is sold together with Furberg’s split-boards today. The result is a new unique concept that consists of only one moving part that can be manufactured by bending. The con-struction is in its simplicity a bracket of the aluminum alloy 7075-T6 which rotates about a fixed point, in which it is screwed in one of the split-board’s ski. Meanwhile, the bracket has two cut grooves to attach the bolts on the opposite ski. The new solution can also adjust the distance between the two skis through a newly designed adjustable washer, which is of great advantage because of the fact that the factory that manufactures the split-boards can’t drill the mounting holes with greater precision than +/- 0.5 mm. The new design has also been shown by simulation to be much more rigid than Voile’s clips.
Place, publisher, year, edition, pages
2015. , p. 107
Keywords [sv]
Splitboard, snowboard, konstruktion, slips, design, Furberg, Solidworks, Pughsmatris, simulering, hållfasthet, vridstyvhet, produkt-utveckling, ritningsunderlag
National Category
Engineering and Technology
Identifiers
URN: urn:nbn:se:miun:diva-25433OAI: oai:DiVA.org:miun-25433DiVA, id: diva2:839224
External cooperation
Subject / course
Industrial Design Engineering MT1
Educational program
Master of Science in Industrial Design Engineering TTEDA 300 higher education credits
Supervisors
Examiners
2015-07-022015-07-022024-03-07Bibliographically approved