Is it possible to produce a planar dipole-like antenna with a reduced conductive area without any loss in either robustness or performance? The objective is to reduce the amount of expensive conductor to be used when applying a meshing technique to the printing of antennas. In this context, robustness means that the characteristics are maintained when the antenna is damaged, for example if it is scratched. This is particularly important for radio frequency identification tags in logistic systems. A general antenna robustness evaluation methodology, based on numerical simulations of a large number of randomly damaged antennas, is used for the antenna comparisons. The antenna performance degradation, based on the return loss (S11) at 868MHz, is monitored for some basic planar antennas. Finally, we show that it is possible to produce robust low-cost antennas using wire replacements for the solid planar antennas and thus, provided that the robustness requirement is moderate, replace the solid antenna with a thin conductor analogue.
VR-