Microscopic Hybrid Membranes Made of Cellulose-Based Materials Tuned for Removing Metal Ions from Industrial Effluents
2021 (English)In: ACS Applied Polymer Materials, ISSN 2637-6105, Vol. 3, no 8, p. 3733-3746Article in journal (Refereed) Published
Abstract [en]
Most of the polymeric membranes used today in water decentralization are synthesized through complicated and expensive processes, contain unrenewable petrochemical building blocks, and are characterized by untailored surfaces. Besides their significant drawbacks, they do not comply with environmental requirements and regulations and thus should be replaced with more eco-friendly products. The urgent need is to create robust and tunable nano/micro materials for confidently designing efficient and selective polymeric water filters with guaranteed sustainability and biodegradability. Active hybrid membranes made of eco-friendly high-grade microfibrillated cellulose (MFC), appropriately functionalized, have shown superior performance during the separation of metal ions from the industrial effluents, and their separation efficiency has been found to be tunable with a proper selection of type and density of the functional groups. On the basis of these findings and needs, we have developed a chemo-enzymatic functionalization strategy for grafting methyl and phosphate groups on the MFC fibers. This methodology can calibrate the interlayer fiber spacing and control the pore-size distribution of the membranes appropriately. We demonstrate this in the present work by characterizing the impact of Mg2+ and Cr3+ ions and their mixture (Mg2+ and Cr3+) on the membrane separation performance extensively by using various experimental techniques and computational methods. Moreover, we have adapted this sustainable, fully water-based system for upscaling the hybrid membranes in continuous mode by resorting to the phosphate-MFC membranes for the spiral-bound modules in cartridge use. We have developed the flow-through (FTM) and flow-over (FOM) modules and tested them to separate metal ions from the industrial effluent, ensuring regeneration and reusability. Our results indicate that these prototype hybrid MFC membranes represent the most promising type of next-generation high-performance filtration devices for a more sustainable society. © 2021 American Chemical Society.
Place, publisher, year, edition, pages
American Chemical Society , 2021. Vol. 3, no 8, p. 3733-3746
Keywords [en]
functionalization, microfibrillated cellulose, modified surface, spiral wound modules, sustainability, Biodegradability, Biodegradable polymers, Cellulose, Cellulose nanocrystals, Effluents, Environmental protection, Environmental regulations, Hybrid materials, Metal ions, Metals, Microfiltration, Pore size, Reusability, Sewage, Sustainable development, Water filtration, Cellulose based materials, Eco-friendly products, Environmental requirement, Experimental techniques, Microfibrillated cellulose (MFC), Regeneration and reusability, Separation efficiency, Separation of metal ions, Membranes
Identifiers
URN: urn:nbn:se:miun:diva-43498DOI: 10.1021/acsapm.1c00105ISI: 000685899900006Scopus ID: 2-s2.0-85110979525OAI: oai:DiVA.org:miun-43498DiVA, id: diva2:1604196
2021-10-192021-10-192021-10-19Bibliographically approved