miun.sePublications
Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
An Analytical Model of the Effective Delay Performance for Bluetooth Low Energy
Mid Sweden University, Faculty of Science, Technology and Media, Department of Information and Communication systems.
ABB Corporate Research.
Mid Sweden University, Faculty of Science, Technology and Media, Department of Information and Communication systems.
2016 (English)In: IEEE 27th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC'17), Valencia, Spain, Sept. 2016., IEEE, 2016, p. 6-11, article id 7794553Conference paper, Published paper (Refereed)
Abstract [en]

With the uprising trend of the integration of wireless sensing systems in fields such as health care and industrial processes, where information exchange between power-limited devices is required, lower energy consumption and Quality of Service demands are becoming more stringent. Bluetooth LowEnergy is a promising technology that provides, besides ultra-low energy properties, compatibility with most mobile units. However,apart from power efficiency, opportune and reliable information delivery is mandatory in time-critical applications. In this paper we propose an analytical model of the delay performance of Bluetooth Low Energy for connection-oriented applications under different bit error conditions. In addition to the physical over-the-air latency, we also analyze the effect of the occurrence time of an Application Layer event on the effective transmission delay. We highlight the impact of the device’s processing speed and the timing configuration of the connectionon the final measured latency. Simulation results validate the accuracy of the model for all the analyzed cases.

Place, publisher, year, edition, pages
IEEE, 2016. p. 6-11, article id 7794553
Keywords [en]
Bluetooth Low Energy, BER, PER, Delay, Markov chain
National Category
Communication Systems Telecommunications Computer Engineering
Identifiers
URN: urn:nbn:se:miun:diva-29075DOI: 10.1109/PIMRC.2016.7794553ISI: 000391598800002Scopus ID: 2-s2.0-85010081532Local ID: STCISBN: 978-1-5090-3254-9 (electronic)OAI: oai:DiVA.org:miun-29075DiVA, id: diva2:1033779
Conference
IEEE 27th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC'17), Valencia, Spain, 4-8 Sept. 2016.
Projects
TIMELINESSSMART (Smarta system och tjänster för ett effektivt och innovativt samhälle)
Funder
Knowledge FoundationAvailable from: 2016-10-10 Created: 2016-10-10 Last updated: 2019-09-09Bibliographically approved
In thesis
1. Low Power Wireless Technologies for IIoT: Analysis and enhancement of communication delay, reliability and scalability
Open this publication in new window or tab >>Low Power Wireless Technologies for IIoT: Analysis and enhancement of communication delay, reliability and scalability
2019 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

In recent years, the implementation of wireless communication systems in industrial environments has significantly increased. As a result, new applications such as Industrial Internet-of-Things (IIoT) have arisen, reshaping the future of industrial automation. Industrial environments, however, pose a demanding challenge for the implementation of wireless communication systems. IIoT applications have very stringent Quality of Service (QoS) requirements, in particular regarding energy consumption, timeliness, and reliability; and failing to fulfill the requirements could result in costly and dangerous system faults. Ranging from short to long range, the wide set of possible application cases within IIoT is based on different wireless technologies designed to excel in a certain scenario. A common aspect of these applications is the presence of energy-limited devices, and as a result, the development of low power technologies is becoming increasingly more important.

In this thesis, three specific low power wireless technologies are analyzed: Bluetooth Low Energy (BLE), Bluetooth Mesh, and LoRa. These three protocols target short, mid and long-range communication, respectively, thus providing the opportunity of exploring a wider set of application cases. The overall purpose of this thesis is to contribute to an extensive and well-rounded understanding of how these three technologies perform in terms of the scalability, reliability, and transmission delay. In particular, the aim is to determine their suitability for IIoT and to identify the key elements within their functional schemes that can be optimized to achieve improved performance.

The first part of the thesis explores the potential of BLE meeting real-time demands found in the domain of short-range IIoT. In order to evaluate the suitability of the protocol for these scenarios, we present an analytical model of the delay performance of BLE for connection-oriented configurations. We studied the effect of possible adaptations in the retransmission scheme on reliability and timeliness performance. Different retransmission schemes are evaluated and simulation results proved that by optimally modifying the BLE retransmission model, a maximum delay below 46 ms and a packet loss rate in the order of 10−5can be obtained. Therefore, BLE proved to be capable of fulfilling the requirements of even the most demanding cases within the considered range of applications.

The second part of the thesis evaluates the QoS performance and limitations of the recently released Bluetooth Mesh protocol through extensive simulations. We analyzed the impact of choosing different configurations of the protocol parameters on the end-to-end scalability, reliability and delay performance. In particular, we focused on the configuration of the Advertising Events and Scanning Events timing, including the ScanInterval and TinterPDU . Results revealed that the TinterPDU has to be chosen accordingly with the scanInterval and that it significantly impacts the end-to-end delay and reliability. Due to the flooding approach, larger TinterPDU resulted in a higher end-to-end packet loss rate. We demonstrated that, by introducing randomization in the time parameters, the reliability and delay performance can be greatly improved. It was also shown that the achievable average delay is relatively low, of around 250ms over 10 hops under the worst simulated network conditions. However, we observed that scalability is especially challenging for Bluetooth Mesh since it is particularly vulnerable to broadcast storm, hindering the communication reliability for denser deployments.

The third part of the thesis focuses on Low-Power Wide-Area Networks (LPWANs), in which LoRaWAN, with its physical (PHY) layer design and regulatory efforts, has emerged as a widely adopted solution. By using chirp spread spectrum modulation with quasi-orthogonal spreading factors (SFs), LoRa PHY offers coverage to wide-area applications while supporting a high density of devices. We present an analytical model of a single-cell LoRa system that accounts for the impact of interference among transmissions over the same SF (co-SF) as well as different SFs(inter-SF). The latter is a result of the imperfect orthogonality of the SFs. By modeling the interference field as a Poisson point process under duty-cycled ALOHA, we derived the signal-to-interference ratio (SIR) distributions for several interference conditions. Results indicate that, for a duty cycle as low as 0.33%, the network performance under co-SF interference alone is considerably optimistic, as the inclusion of inter-SF interference unveils a further drop in the success probability and the coverage probability of approximately 10% and 15%. In conclusion, we illustrate how our analysis can characterize the critical device density with respect to cell size for agiven reliability target.

Place, publisher, year, edition, pages
Sundsvall: Mid Sweden University, 2019. p. 80
Series
Mid Sweden University licentiate thesis, ISSN 1652-8948 ; 158
National Category
Engineering and Technology
Identifiers
urn:nbn:se:miun:diva-36202 (URN)978-91-88947-04-8 (ISBN)
Presentation
2019-06-10, M102, Sundsvall, 13:00 (English)
Opponent
Supervisors
Projects
SMART (Smarta system och tjänster för ett effektivt och innovativt samhälle)
Note

Vid tidpunkten för framläggningen av avhandlingen var följande delarbete opublicerat: delarbete 3 manuskript.

At the time of the defence the following paper was unpublished: paper 3 manuscript.

Available from: 2019-05-23 Created: 2019-05-22 Last updated: 2019-06-13Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records BETA

Rondón, RaúlGidlund, Mikael

Search in DiVA

By author/editor
Rondón, RaúlGidlund, Mikael
By organisation
Department of Information and Communication systems
Communication SystemsTelecommunicationsComputer Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
isbn
urn-nbn

Altmetric score

doi
isbn
urn-nbn
Total: 501 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf